**轻松制作：自家的草稿纸教程** 草稿纸是我们日常学习和工作中不可或缺的一部分。无论是学生做作业、画图，还是办公人员记录笔记、计划任务，草稿纸都是我们的得力助手。而市面上常见的草稿纸质量参差不齐，有时候我们需要的草稿纸可能并不容易找到。那么，为什么不尝试自己动手制作呢？下面，我们就来分享一个简单的自家的草稿纸制作教程。 **一、所需材料** 1. 废旧报纸或广告纸：这些纸张价格低廉，且纸张表面较为粗糙，适合做草稿纸。 2. 胶水或浆糊：用于纸张的粘合。 3. 切纸刀或剪刀：用于纸张的裁剪。 4. 干毛巾：用来吸除多余的湿气，增加纸张之间的吸附性。 **二、制作步骤** 1. **选择并清洗纸张**：从废旧报纸或广告纸中选择合适大小和质量的纸张，然后进行清洗，去除纸张上的污渍和墨迹。 2. **切割纸张**：将清洗好的纸张按照所需的尺寸用切纸刀或剪刀进行裁剪。如果纸张比较大，可以先行对折后再次裁剪。 3. **堆叠并粘贴**：将裁剪好的纸张进行层叠，层叠数量可根据你的需要决定，建议从十几张开始试起。使用胶水或浆糊均匀地涂抹在每一层的边缘上，保证纸张之间可以紧密贴合。注意不要使用太多胶水，以免导致纸张过厚、粘连过度。 4. **按压和晾干**：在涂抹完胶水后，用干毛巾轻轻按压纸张，使纸张之间更加紧密地贴合在一起。然后放在通风处晾干，确保纸张完全干燥。 5. **裁剪成合适大小**：待完全干燥后，用切纸刀将草稿纸裁剪成合适的大小和形状。 **三、注意事项**

1. 使用的纸张要干净、无杂质，以保证草稿纸的质量。

2. 粘贴时要注意胶水的用量，避免过多导致纸张过厚或粘连过度。 3. 晾干时要确保通风良好，避免因湿度过大导致纸张粘连或变形。 4. 制作完成后要妥善保存，避免受潮或长时间暴露在阳光下导致变形或损坏。 --- **Self-made Draft Paper Tutorial**

Draft paper is an indispensable part of our daily study and work. Whether students are doing homework or drawing, or office workers are taking notes or planning tasks, draft paper is always our helper. However, the quality of common draft paper on the market varies widely, and sometimes it may not be easy to find what we need. So why not try making it by yourself? Here, we will share a simple tutorial for making your own draft paper.

**I. Materials needed** 1. Waste newspapers or advertising papers: these papers are cheap and have a rough surface, which is suitable for draft paper. 2. Glue or paste: used for paper bonding. 3. Paper cutter or scissors: used for paper cutting. 4. Dry towel: used to absorb excess moisture and increase the adhesion between papers. **II. Making steps** 1. **Choose and clean the paper**: Select appropriate size and quality of paper from waste newspapers or advertising papers, then clean them to remove stains and ink marks on the paper.

2. **Cut the paper**: Use a paper cutter or scissors to cut the cleaned paper according to the desired size. If the paper is large, you can fold it first and then cut it again.

3. **Stack and paste**: Stack the cut papers and paste them together with glue or paste evenly on the edges of each layer, ensuring that the papers can be closely attached together. Be careful not to use too much glue to avoid making the paper too thick or over-adhering. 4. **Press and dry**: After applying glue, use a dry towel to gently press the papers together, making them adhere more tightly together. Then put them in a well-ventilated place to dry, ensuring that the papers are completely dry. 5. **Cut into appropriate size**: After completely drying, use a paper cutter to cut the draft paper into an appropriate size and shape as needed. **III. Notes during making** 1. The used paper should be clean and without impurities to ensure the quality of the draft paper. 2. Pay attention to the amount of glue when pasting to avoid excessive use leading to too thick or over-adhering paper. 3. Ensure good ventilation during drying to prevent papers from sticking or deforming due to high humidity. 4.